Product related questions

No. The minimum layer thickness for these pastes is 5 mm. For filling, use DRY FLEX® SF.

Because of the special construction, there is simply no more room for epoxy. See also: https://www.repair-care.nl/nieuws/dry-flex-sf-de-werking-van-de-2-in-1-koker-uitgelegd/

The raw materials of the BIO FLEX™ products consist for a part of BIO based raw materials. These are raw materials recovered from residual products,…

Yes. The surface of the resin will react with moisture from the air, will not fully harden and must be removed.

Then you will not get a good adhesion of the to resin the substrate. The repair resin will partly react with the moisture in the…

  DRY FLEX® SF adheres well to paint, but the question then is: How firmly is the paint on the wood? The paint is the…

Yes, the pastes can be coloured very well. For this purpose, use small quantities of oil based pigment

This is an epoxy without fillers. The addition of (cheap) fillers – such as glass beads or chalk – results in the presence of unbound…

To ignite wood, a temperature of >270°C is required. The temperature of curing DRY FLEX® will not reach this temperature. However, care should be taken…

DRY FLEX® and BIO FLEX™ products are paintable with all paint systems (A-brands)

For repairs we use the rule; If a paste repair is larger than a fist, laminating is a cheaper solution. If the damage extends beyond…

Yes, as long as the temperature of air and surface are above 0°C. At temperatures from 0°C DRY FLEX® 1, 4, BIO FLEX™ COOL AND…

Yes, DRY SEAL™ MP is a specific modified silane terminated polymer.

Usually yes, but please check before applying.

DRY SEAL™ MP has been tested and is compatible with a wide variety of glazing including acoustic, laminated, sealed double-glazing, Slimlite double glazing, plate, solar…

DRY SEAL™ MP should only be applied in dry weather but will not be affected by rain once it is applied.