DRY FLEX® COOL

Repair Care are delighted to announce the launch of a new product DRY FLEX® COOL.

The product features:

  • For repairs with repair depths 5 – 40 mm.
  • More specific:  0 – 10°C for a thickness of 5 – 40 mm and 10 – 15°C for a thickness of 5 – 25 mm.
  • Processing temperature: 0 – 15°C.
  • Pot life at 10°C: 35 minutes.
  • Sandable and paintable after 15 hours (at 10°C).
  • Very good to dose and mix.
  • Contains renewable resources (bio based).
  • Can be modelled tight.
  • No shrinkage.
  • Mixing-colour-control-system: if mixed correctly, streak-free transparent green

Vacature mechandiser